Shopping Bag

schoolhouse | hints

Troubleshooting Stitch Problems (Skipped Stitches, Thread Mess, etc.)

This is Singer Featherweight Stitch Formation 101!  If your Singer Featherweight is skipping stitches, not stitching at all or perhaps looping or causing an awful thread mess on the underside of your fabric, then this video tutorial will show you the easy tips for what you can do to fix it and save you a trip to the service technician. If your machine is actually jammed, the handwheel won't turn and the needle will not go up and down, then see our other tutorial on the Featherweight Schoolhouse for How To Remove Thread From the Bobbin Case Base & Hook...

Read more


Removing the Presser Bar Lifter

If your presser bar lifter is broken or you need to remove it for paint preparation / restoration, then this quick video tutorial will show you how to do just that.  It's a bit tricky, but after receiving the question from a customer on our Singer Featherweight facebook group, Carmon made this impromptu video to show her how.

Read more


How To Get Rid of the Moldy Mildew Smell in a Featherweight Case

The first thing to check is the felt drip pad underneath the machine. Unscrew the large nut on the bottom tray and if the felt drip pad is saturated with oil like the one shown above then it not only needs a new one, but it could be holding some of the musty odor being emitted by the case. This may not alleviate the pungent odor entirely (especially if your case has been exposed to moist climates), however, this is a good time to change the felt as part of the beginning maintenance. We carry sticky-back Featherweight 221 & 222K...

Read more


How To Refurbish a Singer Featherweight Case

In this video tutorial, our young daughter, Ruthie, will show you all the restoration steps for how to clean and refurbish / restore a Singer Featherweight case.  This process will work on all black Singer Featherweight cases. On our Singer Featherweight Maintenance Workshop Tour this past summer, she became known at each class as the one to teach this portion of our workshops.  Step-by-step, she will show you the process of bringing that old, worn-out-looking case to a new luster -- giving it new life again!   Towards the end of the video, she and I will also show you...

Read more


Learning About the Motor Lubricant Ports

Ever wondered what it looks like inside your motor or how much lubricant is required to put in that deep dark motor lubricant port?  This video tutorial will show you a perfect cross-section cut-away of the motor's interior as well as the different motor lube port styles.  There is one kind that is particularly difficult to get to and Carmon will show you his trick for how to get an old, hard felt wick going again.  

Read more


How to Loosen the Spool Pin Coverplate if the Screw is Too Tight

If your spool pin coverplate seems to be impossible to remove because of that stuck or stripped spool pin screw, this quick impromptu video might be just the trick to help you.  Once you get your spool pin cover plate removed, be sure to not screw the screw back down too tightly -- just finger tight is sufficient. This will allow you to easily remove it next time for your routine oiling and maintenance.

Read more


How To Remove and Install a Singer Featherweight Belt

We are sometimes asked when to replace a Featherweight belt as well as how to remove and install a new belt. This video tutorial will show you examples of some bad belts and what to look for, as well as how to properly install it.   Another thing to take note of is the motor pulley, because depending on what kind you have will depend on how the belt is removed and how it is installed.  Many of you may have 2, 3, 4, or more Featherweights in your collection... and you may have noticed that some motor pulleys are...

Read more


How to Adjust the Stitch Length Lever

Yesterday, there was a question on our Facebook group about the stitch length lever (or sometimes called the "stitch length regulator") and so this video tutorial was made to help answer that question as well as addressing a couple other things, too.  I will show you what to do if the lever is too loose and rotates around or if it is too stiff and difficult to raise for reverse and lower to adjust the stitch length.  There are a couple of places to oil once you get it adjusted and with this tutorial you will learn where those spots...

Read more


Featherweight Timing (and how to replace the Gib Hook)

In this video tutorial Carmon Henry gives the step-by-step process for how to set the hook timing on a Singer Featherweight.  Timing is almost never an issue on a Singer Featherweight 221 or 222.  What that means is -- that it is virtually impossible for a Featherweight to get out of time just from normal, everyday use.  This only happens if someone has disassembled, changed or wanted to adjust any of the assembly rotations or shaft positions, even by accident. This tutorial includes removal of the entire hook assembly as well as reassembly and timing of the sewing machine hook....

Read more


How to Fix Receptacle Pins for Better Connection

How to Fix Receptacle Pins for Better Connection A common question we receive has to do with the Featherweight plug being too loose in the receptacle. Watch the short video above to see what to do should this ever occur with one of your Featherweight machines. My Featherweight friend, Brad Sawatwipachai, was a great help in preparing this hint for video presentation. A loose receptacle can cause the light to flicker or the motor to lose power. To remedy this problem, you will need a flat screwdriver. Your machine would have originally come with two screwdrivers, so you will want...

Read more